Independent contractors, licensed in MA

Covering 1 ZIP code

Chimney Crown Repair in Dartmouth, MA

On most older Massachusetts chimneys the top is a thin mortar wash, not a crown. It cracked years ago, and it is where the water has been getting in ever since.

  • Covering 1 Dartmouth ZIP code
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about crown repair in Dartmouth

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Crown Repair in Dartmouth, Massachusetts

What to ask for on Chimney Crown Repair in Dartmouth

  • Crack repair and flexible coating
  • Full recasting with a drip edge
  • Expansion joint at the flue tile
  • Usually paired with a cap
Call about crown repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Dartmouth. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown recast on a colonial stack in Dartmouth, MA
Crown recast on a colonial stack Cast, reinforced and projecting past the brick with a drip edge — not a mortar wash troweled flush.
Repointed in matched lime mortar in Dartmouth, MA
Repointed in matched lime mortar Matched by analysis rather than by eye, because modern hard mortar destroys soft handmade brick.
Liner fitted to an unlined flue in Dartmouth, MA
Liner fitted to an unlined flue Many pre-tile chimneys are brick and mortar joints only. A stainless liner isolates the structure from combustion gases.

Chimney Crown Repair in Dartmouth

Much of Dartmouth's housing was built before central cooling was normal and often before ductwork was, so heating and cooling arrived separately and at different times. That is why so many houses here run a boiler for heat and something entirely different for cooling.

About 19% of homes in Dartmouth were built before 1940 — old enough to have been built with radiators and no ductwork at all; 33% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Why a wash fails and a crown does not

A mortar wash is mortar troweled over the top of the brick, roughly sloped and finishing flush with the outer face. It has no reinforcement, no expansion joint where it meets the flue tile, and no overhang. Clay tile and mortar expand at different rates, so it cracks around the tile within a decade — and with no overhang, water that gets through runs straight down the brick face rather than dripping clear.

A proper crown is cast, at least two inches thick at its thinnest, reinforced, sloped away from the flue, with a bond break at the tile and a projection past the brick with a drip edge underneath.

When a coating suffices

Hairline cracks in a crown that is otherwise correctly shaped can be bridged with a flexible crown coating. It accommodates movement in a way rigid mortar cannot, it is inexpensive, and it buys years.

When it must be recast

Cracks wide enough for a coin, missing sections, a wash with no overhang at all, or break-up around the tile. Coating over that seals water in.

The crown is rarely the only work

By the time a crown is visibly cracked it has been admitting water for years, and that water has been somewhere. Recasting without checking the courses beneath is how a chimney gets repaired twice.

Do the cap at the same time

Same access, same visit, and an uncapped flue undermines new crown work anyway. Fitting both together costs far less than two trips up a staging tower.

Slate roofs complicate access

Getting to a crown on a steep slate roof means staging rather than a ladder, because walking slate breaks it. That is a genuine cost difference and it is why quotes on similar chimneys can differ so much.

The full guide: everything about chimney crown repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Dartmouth.

Areas we cover in Dartmouth

Our Dartmouth coverage takes in the neighborhoods around Bliss Corner, Padanaram, Russells Mills and Smith Mills.

Chimney Crown Repair in Dartmouth — FAQs

Can you work on a rental or multi-family property in Dartmouth?

Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.

I heat with oil in Dartmouth — what does that mean for the flue?

Around 33% of homes here heat with oil, and oil soot is acidic. It attacks flue tile and the mortar between tiles from the inside, where a look from the roof will not find it. That is the case for a camera survey rather than a visual inspection. It also matters if you ever convert to gas: the flue will then be far too large for the new appliance and will need relining.

Nothing vents into our chimney any more. Does it still matter?

Less urgently, but yes. An uncapped disused flue collects rain, leaves and nesting for years with nobody noticing, and water sitting inside it damages the structure from within. If the chimney is genuinely finished with, removing it above the roofline and roofing over is a legitimate option. If anything at all still vents into it — a water heater in particular — then it matters as much as it ever did.

What chimney problem is most common around Dartmouth?

Wind-driven rain entering at the flashing rather than through the crown. That pattern is regional rather than universal — quincy, Braintree, Plymouth, Fall River and New Bedford. It is worth knowing before you book, because it tells you what someone should be looking hardest at here.

How much does chimney work cost in Dartmouth?

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Do you cover all of Dartmouth?

Yes — all 1 ZIP codes in Dartmouth and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How do I know the crown is cracked?

Rarely from the ground. It needs a look from the roof or a drone. Indirect signs are water inside near the chimney, staining down the brick, or efflorescence on the exterior.

Can I seal it myself?

A flexible coating on a sound crown is within reach of a careful homeowner comfortable at height. Cast repairs are not, and on a slate roof the access risk alone argues against it.

Call now How it works