Independent contractors, licensed in MA

Covering 1 ZIP code

Chimney Flashing Repair in Randolph, MA

Water on a ceiling near the chimney, appearing only in driving rain, is the signature of failed flashing — and on a Massachusetts slate roof it is skilled work rather than a quick patch.

  • Covering 1 Randolph ZIP code
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about flashing repair in Randolph

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Flashing Repair in Randolph, Massachusetts

What to ask for on Chimney Flashing Repair in Randolph

  • Step and counter-flashing in copper or lead-gray metal
  • Reglet cut into the mortar joint
  • Slate and cedar shingle detailing
  • Coordinated with reroofing
Call about flashing repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Randolph. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown recast on a colonial stack in Randolph, MA
Crown recast on a colonial stack Cast, reinforced and projecting past the brick with a drip edge — not a mortar wash troweled flush.
Repointed in matched lime mortar in Randolph, MA
Repointed in matched lime mortar Matched by analysis rather than by eye, because modern hard mortar destroys soft handmade brick.
Liner fitted to an unlined flue in Randolph, MA
Liner fitted to an unlined flue Many pre-tile chimneys are brick and mortar joints only. A stainless liner isolates the structure from combustion gases.

Chimney Flashing Repair in Randolph

Two things shape chimney work in Randolph: the age of the building stock, and what the weather does to masonry that has been standing in it for decades. The chimney is rarely the thing that changed — what changed is usually what vents into it.

About 16% of homes in Randolph were built before 1940 — old enough to have been built with radiators and no ductwork at all; 22% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Coordinating with the roof

The best moment to redo chimney flashing is while the roof is open. The worst outcome is a roofer laying new covering over old flashing to save time, which is common and which guarantees a leak within a few years.

If a reroof is coming

Raise the chimney detail before the roofing contract is signed, and establish who is responsible for the flashing. Split responsibility is how it ends up done badly by whoever gets there last.

Telling flashing from crown

Flashing leaks appear with wind-driven rain and often stop in ordinary showers. Crown leaks appear whenever it rains. A hose test working upward in sections separates them before anyone starts work.

Two layers, not a bead of sealant

Correct flashing is two separate metal layers. Step flashing is a series of L-shaped pieces woven in with the roof courses as they climb the side of the chimney. Counter-flashing is a second layer let into a groove cut in the mortar joint and folded down over the step flashing, so water running down the masonry is thrown clear of the joint.

What is very often there instead is roof cement troweled across the junction. It looks like a repair for a season, then it shrinks and cracks. Any quote describing the fix as sealing or caulking the joint is describing a patch.

The reglet is what lasts

Counter-flashing must be cut into the mortar, not stuck to the surface. Surface-mounted metal held with sealant fails when the sealant does. A reglet cut, the metal wedged and the joint pointed lasts as long as the roof.

Slate changes everything

On slate, slates have to be carefully lifted and relaid rather than nailed through, and a broken slate becomes the next leak. Copper is the usual metal because it will outlast the roof. This is a genuinely skilled job and not every roofer does it well.

The full guide: everything about chimney flashing repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Randolph.

Areas we cover in Randolph

That includes properties near Crawford Square Area, Highland Avenue Area, Mazzeo Drive Corridor and Randolph Center, and everywhere else in Randolph.

Chimney Flashing Repair in Randolph — FAQs

Nothing vents into our chimney any more. Does it still matter?

Less urgently, but yes. An uncapped disused flue collects rain, leaves and nesting for years with nobody noticing, and water sitting inside it damages the structure from within. If the chimney is genuinely finished with, removing it above the roofline and roofing over is a legitimate option. If anything at all still vents into it — a water heater in particular — then it matters as much as it ever did.

What chimney problem is most common around Randolph?

Wind-driven rain entering at the flashing rather than through the crown. That pattern is regional rather than universal — quincy, Braintree, Plymouth, Fall River and New Bedford. It is worth knowing before you book, because it tells you what someone should be looking hardest at here.

How much does chimney work cost in Randolph?

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Do you cover all of Randolph?

Yes — all 1 ZIP codes in Randolph and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How quickly can someone get to me in Randolph?

For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.

My fireplace smokes into the room. What is wrong?

Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.

Our roof is slate and very old. Is this still repairable?

Usually, but it needs someone who works slate. Walking a slate roof without staging breaks it, and a cheap flashing repair that cracks a dozen slates is not cheap.

Can flashing just be sealed?

As a stopgap before proper work, yes. As the repair, no — sealant over a flashing joint is the most common failed chimney repair there is.

Call now How it works