Independent contractors, licensed in MA

Covering 5 ZIP codes

Chimney Crown Repair in Waltham, MA

On most older Massachusetts chimneys the top is a thin mortar wash, not a crown. It cracked years ago, and it is where the water has been getting in ever since.

  • Covering 5 Waltham ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about crown repair in Waltham

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Crown Repair in Waltham, Massachusetts

What to ask for on Chimney Crown Repair in Waltham

  • Crack repair and flexible coating
  • Full recasting with a drip edge
  • Expansion joint at the flue tile
  • Usually paired with a cap
Call about crown repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Waltham. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown recast on a colonial stack in Waltham, MA
Crown recast on a colonial stack Cast, reinforced and projecting past the brick with a drip edge — not a mortar wash troweled flush.
Repointed in matched lime mortar in Waltham, MA
Repointed in matched lime mortar Matched by analysis rather than by eye, because modern hard mortar destroys soft handmade brick.
Liner fitted to an unlined flue in Waltham, MA
Liner fitted to an unlined flue Many pre-tile chimneys are brick and mortar joints only. A stainless liner isolates the structure from combustion gases.

Chimney Crown Repair in Waltham

The systems we see in Waltham tend to share a history — a heating system replaced once or twice, cooling added later, and ductwork extended as rooms were added rather than designed for the house as it now stands. Most comfort complaints here start there.

About 26% of homes in Waltham were built before 1940 — old enough to have been built with radiators and no ductwork at all; 21% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Why a wash fails and a crown does not

A mortar wash is mortar troweled over the top of the brick, roughly sloped and finishing flush with the outer face. It has no reinforcement, no expansion joint where it meets the flue tile, and no overhang. Clay tile and mortar expand at different rates, so it cracks around the tile within a decade — and with no overhang, water that gets through runs straight down the brick face rather than dripping clear.

A proper crown is cast, at least two inches thick at its thinnest, reinforced, sloped away from the flue, with a bond break at the tile and a projection past the brick with a drip edge underneath.

When a coating suffices

Hairline cracks in a crown that is otherwise correctly shaped can be bridged with a flexible crown coating. It accommodates movement in a way rigid mortar cannot, it is inexpensive, and it buys years.

When it must be recast

Cracks wide enough for a coin, missing sections, a wash with no overhang at all, or break-up around the tile. Coating over that seals water in.

The crown is rarely the only work

By the time a crown is visibly cracked it has been admitting water for years, and that water has been somewhere. Recasting without checking the courses beneath is how a chimney gets repaired twice.

Do the cap at the same time

Same access, same visit, and an uncapped flue undermines new crown work anyway. Fitting both together costs far less than two trips up a staging tower.

Slate roofs complicate access

Getting to a crown on a steep slate roof means staging rather than a ladder, because walking slate breaks it. That is a genuine cost difference and it is why quotes on similar chimneys can differ so much.

The full guide: everything about chimney crown repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Waltham.

Areas we cover in Waltham

We work throughout Waltham, including the areas around Auburndale, Beaver Brook Reservation, Bentley University and Brandeis / North.

Chimney Crown Repair in Waltham — FAQs

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in Waltham?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

What does a Level 2 inspection include?

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

Is chimney waterproofing worth doing?

On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.

Is the crown the same as the cap?

No. The crown is the masonry slab covering the top of the chimney around the flue; the cap is the metal cover with mesh over the flue opening itself. Many chimneys need both and plenty have neither.

Water only comes in during storms. Is it the crown?

Probably not — that points at the flashing. A cracked crown admits water in ordinary rain too.

Neighborhoods we cover in Waltham

Chimney work across Waltham and the areas around it.

  • Auburndale
  • Beaver Brook Reservation
  • Bentley University
  • Brandeis / North
  • Brandeis University Area
  • Cedarwood Historic House
  • Gore Place
  • Lincoln
  • Lyman Estate
  • Newton / Nonantum
  • Newton / West Newton
  • North Waltham / Highlands
  • Prospect Hill Park
  • Prospect Hill Tower
  • Stonehurst
  • The Rose Art Museum
  • Weston
Call now How it works